Ribbon Material................pure aluminum, no plastic film.
Ribbon Mass....................0.008 grams
Ribbon Width..................8mm
Ribbon length.................66mm
Ribbon Area....................5.28 cm^2
Frequency range............. 2000 Hz to 50,000 Hz.
Recommended crossover...3000 Hz, 24 dB Linkwitz-Riley.
Impedance......................2.6 ohms above 1000 Hertz.
DCR...............................0.05 ohm
Sensitivity.......................94 dB , 2.83 volts at 1 meter.
Power handling with recommended crossover 15 watts.
Speaker system power up to 250 Watts.
Weight 4.5 pounds
Face.......94 mm x 94 mm x 6mm aluminum
Cabinet hole......60 mm W x 81 mm H x 112 mm D
Weight.....4.5 pounds

Raven pure ribbon tweeters are the reference standard tweeter that is used by several of the best speaker designers in the world. They have a totally uncolored sound with huge sound stage, amazing inner detail and stunning dynamic range. Ravens use a micro foil ribbon that has a lower mass/area ratio than any other ribbon on the market. This allows the surrounding air to totally damp all mechanical resonance. They also use a huge neodymium magnet with a deep and symmetric magnetic field to minimize distortion.

.